| Release 2.1 |
Enhancement to the OPEN command to allow for
generic printers. |
| |
Enhancement to close the report for
logical printers using JOB=BRACKET after not receiving input after x number of
seconds. |
| |
Added an exit to replace the SCS
command codes with printer control codes (PCL or PPDS). |
| |
Added an option to process print screen
applications that send all the screen literals first followed by the data
fields. |
| |
Added XWRITER field to logical printer
attributes, for MVS only. |
| |
Added an exit to allow the report’s
attributes to be changed before the report is allocated, for MVS only. |
| |
Added an option to cause a delay
between VTAM RU chains to slow down VVP processing, for MVS only. |
| |
Changed VVP to start non-swappable, for
MVS only. |
| |
Enhancement to the logical printer
tracing facility. |
| |
Enhancement to the FIND command to
locate the variable in any column. |
| |
Added an option to set the carriage
control used for the first line of the report. |
| |
Changed VVP to remove the exclusive
XWRITER and Destination User restriction, for MVS only. |
| |
Changed VVP to retry the TCP/IP INITAPI
command in the event TCP/IP is not available, for MVS only. |
| |
Combined the VVPLOG and VVPSUB logs,
for MVS only. |
| |
Replaced the Control Table buffer
allocation parameters with a single buffer parameter. |
| |
Moved more VVP control block allocation
above the line. |
| |
Enhancement to the SHOW command to
display the product passwords. |
| |
Added an option to control which VVP
messages are written to the console or VVPLOG. |
| |
Enhancement to the VVP macros to
improve error checking. |
| |
Improves the generic processing to
filter VVP definitions on the Administration screens and line commands by
allowing the masking character "*" to be used in any position of the definition
name. |
| |
Added an option to log the logical
printer and user definition changes. |
| |
Added file maintenance features.
Change or delete printer or user records through the VVP command line. Execute
any VVP commands in a source member through VVP command line. |
| |
Added support for a VSE2PDF data
stream. |
| |
Added priority option for reports
created by VVP in the JES Queue and VSE/Power LST Queue. |
| |
Added exit (VVPFEXT3) to modify or
suppress each print line. |
| |
Added option to use Machine carriage
control for reports created by VVP. |
| |
Changes the console interface from WTOR
to "MSG partition|jobname,DATA=command", for VSE only. |
|
Download VTAM Virtual Printer 2.1 upgrade
|
|
| Release 2.0 |
Added support for LEXImate escape sequence. |
| |
Added support for SCS Horizontial Tabs and Set Vertical Format. |
|
Added support for a LPD server, MVS only. |
| |
Added support to create variable length record from each VTAM RU (raw feature). |
| |
Added support for Lexmark Barcode commands. |
| |
Added description field for logical printers and name field for users. |
| |
Added option for OMITFF (omit forms feed) at the logical printer level. |
| |
Added support to create the report under the logical printer name. |
| |
When VVP is terminated or the logical printer is closed,
the CICS CRE attribute is not lost. |
| |
Added support to automatically establish sessions when VVP is started.
This feature removes the requirement that logical printers be defined to CICS. |
| |
Added option to custom for PFKeys on VVP screens. |
|
| Release 1.3 |
Added support for additional Buffer Control Orders. |
|
Added feature to segment the VVPLOG for MVS installations. |
|
Added feature to automatically expand the VVP buffer pools. |
|
Added menu system to better control the resources defined to VVP. |
|
Added support for the SAF security interface for VSE installations. |
|
Added option to allow the same user to logon multiple times. |
|
Added feature to terminate a report after a specified number of idle seconds. |
|
For MVS installations, the parameters specified on the JES OUTPUT card will override the parameters specified in the logical terminal entry. |
|
| Release 1.2 |
Support for Repeat to Address control code has been added. |
|
| Release 1.1 |
For MVS installations, the OUTPUT JCL statement is now supported. This allows additional parameters like PAGEDEF and/or FORMDEF to be attached to the report captured by VVP. |
|
For MVS installations, corrects the problem with the year 2000 not recognized as a leap year. |
